Single point, rear D shape ring attachment point. This fall arrest harness has 3-bar slide & rectangular link, leg and chest connections. Adjustable length shoulder straps with 3-bar buckle ensure chest strap to be positioned over the sternum area. Fully adjustability at shoulders - chest and legs makes wearer feel comfort and safe. Material: width 45MM Polyster webbing with Steel fittings. Approved to EN361:2002. Widely in height applications for steel frame work, flat roof work and scaffolding. Labelled with individual serial numbers. Manufactured in three sizes – Small, Medium / Large and Extra Large.

 

 

Front and rear D shap rings for attaching fall arrest lanyards. With 3-bar slide & rectangular link, leg and chest connections. Adjustable length shoulder straps with 3-bar buckle ensure chest strap to be positioned over the sternum area.  Fully adjustability at shoulders, chest and legs makes wearer feel comfort and safe. The metal front attachment enables the user to be rescued safely in the event of a fall.During rescue situations the front attachment point gives the rescuer the flexibility to safely attach to the person who has fallen, enabling him to easily control the rescue whilst comforting the person they are rescuing.Material: width 45mm Polyster webbing with Steel fittings. Approved to EN361:2002. Widely in use for steel frame work, flat roof work and scaffolding.  Labelled with individual serial numbers. Manufactured in three sizes – Small, Medium / Large and Extra Large.

 

 

 

Tested & approved to max weight 130KG
Manufactured to EN354:2002 / EN355:2002
Available in 2M, 1.5M & 1.0M Lengths
Can be fitted with Karabiners / Scaffold Hooks / Snap Hooks
Manufactured from 30mm Polyester Webbing

 

 

 

Two-leg Fall Arrest Lanyard with Energy Absorber 

Tested & approved to max weight 130kg
Manufactured to EN354: 2002 / EN355:2002
Available in 2m, 1.5m & 1m lengths
Can be fitted with Karabiners / Scaffold Hooks / Snap Hooks
Manufactured from 30mm Polyester webbing

 

 

 

This lanyard has no energy absorbing capabilities and therefore MUST NOT BE USED TO ARREST A FALL.

Manufactured to EN354:2002
Available in 2m, 1.5m & 1.0m Lengths
Can be fitted with Karabiners / Scaffold Hooks / Snap Hooks
Manufactrued from 30mm Polyester webbing
All lanyards are labelled with individual serial numbers .

 

Adjustable Restraint Lanyard suitable for restraint, work positioning or as a component in a fall protection system , 1.5M , 1.8M & 2.0M in Length fully extended and can be adjusted down to just over a metre. Not to be used for fall arrest, but for restraining the wearer in a position where there is no risk of falling. Approved to EN354:2002/EN358:2002. Material: 30MM Polyester webbing, Can be fitted with Karabiners / Scaffold Hooks